FlatPac Kitchens
|
FlatPac Kitchens
|
|
Current Category Kitchen Wall cabinets generally include a solid back, a bottom, a top, two ends and an adjustable shelf all cut from 16mm High Moisture Resistant White Melamine board. All exposed edges are covered using a 1mm thick vinyl edge strip. All kitchen cabinets are supplied pre-drilled and pre-edged ready for assembly. All hardware required to build the kitchen cabinet including screws, hinges, cams and cam fittings are supplied. Benchtops and bases are sold separately. Most kitchen cabinets can be cut to a custom width. These cabinets include Vinyl Door/s with Hettich hinges. Door/s are supplied with a selected face groove.
720mm high x 290mm deep x 150 wide Price:
720mm high x 290mm deep x 200 wide Price:
720mm high x 290mm deep x 300 wide Price:
720mm high x 290mm deep x 400 wide Price:
720mm high x 290mm deep x 450 wide Price:
720mm high x 290mm deep x 500 wide Price:
720mm high x 290mm deep x 600 wide Price:
720mm high x 290mm deep x 700 wide Price:
720mm high x 290mm deep x 800 wide Price:
720mm high x 290mm deep x 900 wide Price:
720mm high x 290mm deep x 600 wide x 600 wide Price:
600mm high x 290mm deep x 600 wide Price:
600mm high x 290mm deep x 900 wide Price:
300mm high x 290mm deep x 900 wide Price:
720mm high x 290mm deep x 300 wide Price:
To have Wall Cabinets cut to a custom size enter the following information into the "Custom Box" for each cabinet that needs to be customised. The cabinet to be customised must be purchased as a standard cabinet. a)Enter the Cabinet Name b)Enter the size the cabinet needs to be. The custom size must be smaller than the standard size of the cabinet that has been purchased. c)Enter the number of cabinets to be customised into the "Qty Box" d)The door will be automatically cut to suit the cabinet and the cost is included in the cost to customise the cabinet. e)Corner cabinets, Rangehood cabinets and Open cabinets cannot be cut to size. Price:
|